Our daily tasks rely on the smooth availability of water until that water itself creates a nerve-wracking mess. Water leakage is a common problem in households but many a time handling them becomes extremely challenging.

In the end, you have to call for a professional plumber to get the leakage under control. Handling these insidious leaks in three simple steps. First, you have to find the cause, then mend the system, and finally, pay due attention to the maintenance of the plumbing fixtures. 

Finding the Leak

The first step in fixing the leak is to find the cause and actual source of the leak. If this isn’t proper, the leak may come up in some other place in a matter of time. Where you see the water dripping may not be the place where the leak originates. To find out the potential sources you may hire a professional plumber and make the process faster.

Potential Causes and the Places to Look for are Below for Your Guidance. 

1. Water Pressure & Freezing Issues: Caused by wear and tear due to high water pressure and freezing wear and tear. They can be in the external or pipes and generally cause in winters or if you have high water pressure problems.
2. Basement and foundation issues: Caused by foundation shifts and basement waterproofing failure. They can be generally in the floor plumbing pipes.
3. Internal Plumbing Issues: Caused by interior plumbing failure in joins and due to pipes bursting. They are in wall plumbing pipes where they have weak joints, failed mechanical faucets, or pipe bursts.
4. Clogging Issues: Caused due to clogged gutters.

Repairing the Leaking Pipes

For interior plumbing issues, you need to call upon a professional and cut upon the wall area to determine the location of the leak. The wall was later patched by plaster or sand.

For leakage issues into the flooring area, you should gain your waterproofing checked and install flooring drains if needed. The tough fixes like downspouts and grading should be by experts. As they know what direction or location is Important to the water flow to avoid leakage. 

For tap or shower leakages, the ideal solution is to replace the fixers by calling in the experts. Mechanical faucets, washers, valves, and o-rings are common replacements that need to be made regularly as they don’t last long.

Prevent Leaks in the Future

The last thing after you have fixed the leak is to take precautionary measures to ensure that it doesn’t happen again. You should find a water leak detection plumber and install shut-off valves to prevent water leaks from spreading. A crowded sink cabinet should be avoided, as it causes loose connections and leaks. Insulating the external pipes to prevent freeze wear and tear is also suggested for every household. A technologically advanced solution for the leakage problem is a flow sensor. It detects a leak in the system and automatically shuts off the water supply to notify you about the leak. 

Even a small leakage can cause serious damage like pipes corrosion or water heater blasts. So, it is advised to fix the leaking problems as quickly as one can and as accurately as possible.